Catch unusual flow.
Limit avoidable damage.

This is leak detection in Smart Monitor, from Smart Installers.

Escape of water is one of the most common home insurance claims. Found early, a leak is a repair. Found late, it’s drying out, reinstatement, and a family out of their home.

For an insurer, the record matters as much as the alert: first notification of loss in real time, straight into your systems, and a time-stamped history to support every claim.

A WaterGrip sensor on the supply pipe feeds the platform around the clock: continuous flow, burst pipes, unusual use and freezing temperatures, with leaks detected down to a litre an hour.

One sensor on the supply sees what people miss. A slow drip under the kitchen sink. A toilet that never stops running. A pipe that bursts behind a wall. And pipes at risk of freezing in a cold snap. All in one platform.

It learns how each home uses water. When the flow never drops to zero, even at three in the morning, it flags the leak, sized medium or large, within hours.

Every insured home sits on one live map, with four live numbers across the top: active leaks, claim cost avoided, Legionella risk, and stagnation alerts.

Open any home for its live water data: flow, temperature and the litres lost. Water temperatures are checked against the Legionella limits, and outlets left unused for a week are flagged.

Every home is ranked by water risk, worst first.

Every alert explains itself: what fired, the likely cause, and what to do next, from a dripping tap to a burst pipe.

Each leak becomes a case. A plumber can be organised straight away, and the repair and the litres lost stay on record.

And when a claim comes in, the evidence pack is one click away: what happened, when, and what was done.

Find it early. Fix it fast. Prove it.

Ask Smart Installers about a pilot.